The installation process has been truly revolutionized when using our California Quartz and California Pebble products. It’s your pool and it’s your back yard. Which would you prefer:
The traditional construction site process using a less-than-exact science mixture of plaster, aggregate and accelerant extemporarily blended in your front yard by hand, by onsite laborers. The process is messy and requires tarps and a giant slurry semi-tractor-trailer-truck. In contrast, California Quartz and California Pebble products are precisely preblended at our plant requiring only a small concrete pump and a plaster truck minimizing the mess and the number of processes required to be performed right in your own front yard.
Traditional plaster products turn your back yard into a major construction site. It is an evasive process requiring ropes are crisscrossed above your pool and tied to your house and large structures to suspend water hoses and electrical lines. Then, before the plaster hardens aggregates are also randomly scattered by laborers, by hand over the plaster coating to accent the less-than-exact science mixture that was concocted by a construction crew in your front yard.
Plaster is also problematic in that it coats the aggregate in a haze-like finish and has be to be misted off by water during the curing process to help bring out the aggregate. After the curing process of 24-48 hours the plaster finish still requires an additional acid wash over the entire surface, done by hand to remove more of the plaster coating to better expose the aggregate. The “cloudy haze” after your pool is filled can prevent your newly remodeled pool from looking clear for weeks and sometimes months.
California Quartz and California Pebble precisely preblended products are applied and exposed with one spray wand and a pressure washer. No ropes crisscrossed above your pool and tied to your house and large structures to suspend water hoses and electrical lines, no construction laborers blending by hand, no laborers scattering aggregate by hand to compensate for a less-than-perfect product blend and finally no evasive processes to your home or structures. Your pool is crystal clear the moment it is filled, not weeks or months later. California Quartz and California Pebble products are simply revolutionary new products that streamline the installation process, is intrusive on your property, and offers you a better overall remodeling experience.
The pool finish will start to hydrate and cure immediately after mixing. This time period is when a finish is most susceptible to staining, scaling and discoloration. Proper start-up procedures including timely brushing and constant monitoring and adjusting of the pool water is mandatory. The following recommended start-up will provide best results. Brushing and monitoring chemical will be mandatory by the pool owner or a trained pool technician during the service life of any pool surface. NEVER MIX CHEMICALS–ALWAYS ADD CHEMICALS TO WATER, NEVER WATER TO CHEMICALS.